Total Chaos Fabrcation

3RD GEN TUNDRA REAR LINKS


REAR LINK KIT
PART #88450
$2,399.00

1-01-3rd-gen-toyota-tundra-rear-fenderwell-links-king-shocks2-01-3rd-gen-toyota-tundra-aftermarket-rear-links-total-chaos-fabrication
CALL TO PLACE ORDER
INSTALL INSTRUCTIONS



WHY

TC rear links feature urethane bushings that offer better on and off-road control and handling. TC lower links are stronger than stock and more capable of hard impacts on the trail. This kit allows you to firm up the ride and reduce some of the flex and vibration that is common with the factory rubber bushings.

FEATURES

100% bolt on.

Lower links are constructed from 1.5".188 wall 4130 chromoly tubing for maximum strength and feature 1" stainless steel uniballs and urethane bushings.

Upper links are constructed from 1.25" x .156 wall 4130 chromoly tubing with 1" uniballs and urethane bushings.

Panhard bar is constructed from 1.25" x .250 wall 4130 chromoly tubing and uses 7/8" chromoly rod ends and can be adjusted if needed.

Uppers and lowers include greaseable urethane pivot bushings. Link kit is fully rebuildable.

Capable of more wheel travel with extended shocks.

Hi-misalignment spacers included, re-uses factory mounting hardware.

3 stage powder coat process includes clear coat for long lasting finish.

PARTS INCLUDED







3RD GEN TUNDRA REAR LINKS

REAR LINK KIT
PART #88450
$2,399.00

CALL TO PLACE ORDER
INSTALL INSTRUCTIONS



WHY

TC rear links feature urethane bushings that offer better on and off-road control and handling. TC lower links are stronger than stock and more capable of hard impacts on the trail. This kit allows you to firm up the ride and reduce some of the flex and vibration that is common with the factory rubber bushings.

FEATURES

100% bolt on.

Lower links are constructed from 1.5".188 wall 4130 chromoly tubing for maximum strength and feature 1" stainless steel uniballs and urethane bushings.

Upper links are constructed from 1.25" x .156 wall 4130 chromoly tubing with 1" uniballs and urethane bushings.

Panhard bar is constructed from 1.25" x .250 wall 4130 chromoly tubing and uses 7/8" chromoly rod ends and can be adjusted if needed.

Uppers and lowers include greaseable urethane pivot bushings. Link kit is fully rebuildable.

Capable of more wheel travel with extended shocks.

Hi-misalignment spacers included, re-uses factory mounting hardware.

3 stage powder coat process includes clear coat for long lasting finish.

PARTS INCLUDED

1-01-3rd-gen-toyota-tundra-rear-fenderwell-links-king-shocks2-01-3rd-gen-toyota-tundra-aftermarket-rear-links-total-chaos-fabrication

More Parts For Your Vehicle:




CUSTOMER SUPPORT

Warning WARNING: This product can expose you to a chemical or chemicals such as Talc, which is known to the State of California to cause cancer, birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov

HEADQUARTERS

TOTAL CHAOS FABRICATION INC.
159 NORTH MAPLE STREET
UNIT #J
CORONA, CA 92878
951.737.9682

Hours: M-Th 7am to 5:30pm PST
Closed: Fri, Sat & Sun


Follow the CHAOS

Back to Top