TOTAL CHAOS FABRICATION - 1996-2002 4Runner 2WD & 4WD Long Travel Suspension Kit

#96000K-4
Urethane Pivot Upper Control Arms

Price $3074.80

Kit Includes: 4130 Tubular Upper Control Arms, Tubular/Plated Lower Control Arms with Dual Shock Tabs, 1" ID Stainless Steel Uniballs, Heat-treated 17-4 Stainless Steel Hi-Misalignment Spacers, Polyurethane Bushing Pivots with Inner Sleeves, CNC-Machined Uniball Slug Adapters and Clips, Zinc Plated End Washers, Grade 8 Mounting Hardware, 4130 Tie-Rod Extensions, Limit Straps with Adjustable Clevis and Weld-on Mounts, DOT-Approved Stainless Steel Extended Brake Lines, Bolt-in Upper Shock Mounts

#96000K-4H
Urethane Pivot Upper Control Arms

Kit Includes: 4130 Tubular Upper Control Arms, Heim Joints & Spacers, Tubular/Plated Lower Control Arms with Dual Shock Tabs, 1" ID Stainless Steel Uniballs, Heat-treated 17-4 Stainless Steel Hi-Misalignment Spacers, Polyurethane Bushing Pivots with Inner Sleeves, CNC-Machined Uniball Slug Adapters and Clips, Zinc Plated End Washers, Grade 8 Mounting Hardware, 4130 Tie-Rod Extensions, Limit Straps with Adjustable Clevis and Weld-on Mounts, DOT-Approved Stainless Steel Extended Brake Lines, Bolt-in Upper Shock Mounts

Price $3496.74

AUTHORIZED TC DEALERS

1996-2002 4Runner 2WD & 4WD

Toyota 4Runner +3.5" Long Travel Suspension

3.5" extended 4130 chromoly tubular upper and lower control arms bolt to factory control arm mounting locations.
Upper ball joints are replaced with 1" uniballs for maximum wheel travel and component strength.
TOTAL CHAOS includes 1" I.D. uniballs that feature a heat treated stainless steel ball & heat treated stainless steel race for maximum corrosion resistance and component longevity. These uniball's also features a military grade PTFE woven fabric liner that helps prevent noise.
Heim pivot upper control arms can be custom ordered for this system.
Original tubular/plated lower control arms are designed with internal gussets and are pre tabbed for dual 2.5" shock capability.
Optional: Boxed and plated lower control arms are bump stop compatible and designed for dual 2.5" shock capability. (specify model at time of order)
2.5" long travel specific coil over shocks bolt into the factory coil bucket location. Extended travel shocks are too short and will not work.
A secondary external bypass shock can be installed to increase dampening and tune-ability.
Spring rate options offer the ability to customize your ride for your specific application allowing you to maximize tune ability and performance.
Adjustable limit strap clevis' are included so that you can properly limit the suspensions droop wheel travel and make necessary adjustments during the life of the limit strap.
Stainless steel DOT braided brake lines, TC custom 17-4 stainless hi-misalignment spacers and all grade 8 mounting hardware is included.
TC modified Tundra axles and cv's are required to be installed to retain 4wd. (axles are sold separately and not included with the kit)
2 stage powder coat process includes a durable clear coat to provide a long lasting finish.
Hand crafted in the U.S.A.
Fiberglass fenders are required.

OPTIONAL HEIM PIVOT UPGRADE

TC includes 3/4" chromoly heim joints for the pivots.
4130 chromoly tubing heim upper control arms are fully adjustable to allow maximum tuning of caster and camber.
Zero bushing deflection.

LIFT: 3-4"

TRAVEL: 13"

TIRE: 33" or 285

TRACK WIDTH INCREASE: 7"

Photos

Accessories