•| 96-04 Tacoma, 96-02 4Runner & 00-06 Tundra Accessories
 |
Secondary 2.0 Shock Hoop - Stock Lower Control Arms The same company who manufactured the first 96-04 Tacoma and 96-02 4Runner bolt on dual shock long travel system now offers the first secondary shock upgrade the retains the use of a stock length Toyota lower control arm. TC has tested and abused for over 1000 off road miles this dual shock system that was designed to be installed with TCF uniball UCA's. Additional fitment may be necessary to install this system with stock UCA's or other brands UCA's . The secondary shock capability increases dampening and stability to on and off road vehicles that remove the factory sway bar and maximize travel. This system will not require the installation of fiberglass fenders. TOTAL CHAOS continues to lead the aftermarket IFS industry with this new stock length lower control arm secondary shock hoop package. The kit features pre formed weld on lower shock tabs that were designed to install a secondary Fox 2.0 remote reservoir shock. The lower control arm mounts are designed to be welded to the stock lower arms and locate in place of the factory sway bar mounts. The secondary upper shock hoop bolts to the factory coil bucket location. Welding is required to the side of the frame rails. Upper shock mount tabs, all mounting hardware and overlay plates are included in this system. PT# - 96602 - Price: $345.00 |
 |
96-04 Tacoma & 03-06 4 Runner 4wd Long Travel Modified Axles Required to retain the 4wd assembly on the Tacoma 4wd long travel kit, TOTAL CHAOS offers a pre modified ready to install axle shaft for both auto locking hub and manual hub vehicles. TC takes remanufactured Toyota Tundra axle shafts and modifies them to achieve the full 13” of wheel travel that the TC long travel kit will provide. The axle shafts also include high angle inner CV boots with new clamps and come ready to install. Axles will fit any 96-04 Tacoma and 96-02 4Runner equipped with the TC long travel kit. PT# - 96300 Auto Hub Axles - Price: $889.00(pr) PT# - 96400 Manual Hub Axles - Price: $1375.00(pr) |
|
|
|
 |
00-06 Tundra 4wd Long Travel 4340 Axles To retain 4wd after installing a TC Tundra long travel kit, TOTAL CHAOS offers these custom extended 4340 axle shafts. These axles are machined out of 4340 material and are heat treated and plated. The axles are exactly 3 1/2” longer than the factory axles to match the added width of the TC long travel system. They will allow for the full 13” of wheel travel that the TC long travel kit provides. The axles must be inserted into the factory inner and outer CV joints prior to installation. TC includes high angle inner CV boots and clamps with the axles. Applications include any 00-06 Tundra 4wd equipped with the TC long travel suspension system. PT# - 97300 4340 Axles - Price: $600.00(pr) |
|
|
|
 |
Tacoma Long Travel Heim Joint Steering Upgrade PreRunner/4wd/4Runner Tundra Long Travel Heim Joint Steering Upgrade 2WD/4WD Maximize wheel travel and add strength to your TC long travel kit when you install the TC heim steering package. This upgrade kit is designed to bolt on with no drilling required (some welding necessary). To mount the heim to the steering arm, press in a machined custom inner sleeve that is designed to reduce the hole to incorporate a 5/8" grade 8 bolt. A weld on double shear tab is also supplied with this kit to provide maximum strength to the 7/8" heim. The heim joint threads are larger in diameter than the factory tie rod end threads adding strength. 7/8" to 5/8" hi-misalignment spacers are included along with our chromoly CNC machined and plated extensions. The inner female extension was designed to bolt directly to the factory male end that connects to the rack steering system. There is no need to remove the factory rubber steering rack boot and let debris enter the steering rack. PT# - 96099 - 96-04 6-lug Tacoma (<shown) PT# - 96098 - 96-02 4 Runner PT# - 97099 - 00-06 Tundra Price: $489.00 |
|
|
|
 |
96-04 Tacoma Prerunner/4wd & 00-06 Tundra 2wd/4wd Weld on Spindle Gusset Failure to properly limit your suspension puts severe stress on the Tacoma and Tundra spindle where the upper ball joint or uniball mounts. Over extending droop travel has caused these spindles to break. TC jumped on a solution to reinforce the spindle and developed this weld on 1/8” laser cut bracket. Properly limited suspension will not damage the spindle, but if your looking for added security and strength weld on a set of these gussets. These gussets only work with 96-04 Tacoma and 00-06 Tundra. PT#-59697 Price:- $35.99 pr. |
|
|
|
 |
96-04 Tacoma Prerunner and 4wd & 00-06 Tundra Urethane Steering Rack Kit Tighten sloppy steering on your Tundra, Tacoma, Sequoia or 4Runner rack and pinion steering system with this urethane bushing upgrade kit! Simple daily driving wears the factory rubber bushings where the rack system mounts. This causes delayed steering response through a sloppy steering wheel. By installing our newly released Tundra replacement urethane bushing kit with custom inner sleeves you can tighten the rack and pinion system and obtain quicker steering response. Available for the Prerunner/4wd Tacoma, and 2wd & 4wd Tundra models, this easy installation will increase off road and highway handling on your vehicle. Specify vehicle type at time of order. PT# - 96701 96-04 Tacoma/96-02 4Runner kit - Price: $25.00 PT# - 97701 00-06 Tundra/Sequoia kit - Price: $34.50 --Download Installation Instructions-- |
|
|
|
 |
96-04 2WD Tacoma Billet Cross Shafts 5 Lug Do you want maximum performance? Solve the 2wd 5 lug Toyota’s weak link by installing these upper control arm billet cross shafts. The factory cross shaft cannot handle installing larger tires or off road abuse and will bend. TC’s 4130 heat treated CNC cross shafts include gun drilled grade 8 hardware that allow greasing of the upper arm bushings on the vehicle. A locking end washer was developed to lock the end bolt into position and eliminate its tendency to back out of the cross-shaft. Plated end washers rest against the urethane bushing to prevent over tightening and crushing of the bushing. Also available for the 2wd Tacoma (PT# - 98420). Call for details. PT#- 98420 96-04 Tacoma 2WD 5-lug Price: $350.00 |
|
|
|
 |
96-04 6-lug Tacoma Secondary Shock Hoop 00-06 Tundra Secondary Shock Hoop Upgrade performance and handling by installing the optional secondary shock to your Tacoma or Tundra long travel IFS kit. 4wd models crave this option due to the added front differential weight. Installing dual 2.5 shocks increases dampening and adds tune ability to TC’s dual shock system. These hoops run a secondary 8” travel 2.5 or 2.0 non coil or bypass shock. The hoop is built from 4130 chromoly tubing and includes hardware to install the shock. Bolt patterns for the circular top plate differ by vehicle model, specify vehicle type at time of order. Some welding and grinding is required during install to ensure proper fit. PT# - 96600 S.A.W PT# - 96601 FOX/KING Price: $235.00 |
|
|
|
 |
96-04 4WD Toyota Tacoma 4wd/4Runner 1" Diff. Drop Spacer 00-06 4WD Tundra 1" Diff. Drop Spacer Tired of tearing inner CV boots or having front drive axles bind on auto locking hub 4wd's when aftermarket replacement shocks have been installed to maximize lift? With the constant quest to maximize lift as well as travel on the 4x4’s, TOTAL CHAOS has developed a 1" drop down spacer to lower the front differential and restore the factory inner CV angles. By installing this kit to your 4wd you will relax the angle on the inner and CV joints by 2-3 degrees. This inexpensive upgrade will add extra life to rubber CV boots. Zinc plated CNC diff spacers wont rust. This kit is highly recommended to be used if you are running any of the aftermarket coil-over lift shocks intended to lift the truck and run larger tires, as well as our own U.C.A. (Upper Control Arm). Installation is about .5 hrs. You will reuse the factory lower dome washer with this item. The factory skid plate can be reinstalled with this component. PT# - 96200 Price: $35.99 |
|
|
|
 |
Tacoma / Tundra Ball Joint Removal- Slug Adapter Install Tools These tools will ease in the installation of the TOTAL CHAOS Upper Control Arms or Long Travel Kit on your Tacoma or Tundra. The kit includes a press to remove the stock upper ball joints, and a press to install the new slug adapters supplied with your TOTAL CHAOS suspension kit. These tools are to be used in conjunction with a heavy duty C-Clamp or a ball joint removal press. PT# - 96005 Price: $17.25 |
|
|
|
 * |
Brake Lines / Suspension Performance upgrades require maintenance if your serious about our sport! With frequent use and abuse on the trail, components such as brake lines, urethane bushings, control arms and hardware can become worn or damaged. TOTAL CHAOS offers a complete line of replacement suspension components and hardware to keep your equipment performing at its best. Every set of brake lines is D.O.T. approved. Every pit box should always include an extra brake line, some replacement hardware, a few OEM parts, and a first aid kit! Unlike other manufacturers in our industry that require you to purchase a compete kit if you damage a control arm on the trail, TOTAL CHAOS offers individual replacement suspension components. Proof of purchase receipt is required or the exchange of the damaged part if necessary. PT# - Call for details. |
|
|
|
 * |
96-04 Tacoma & 00-06 Tundra Urethane Bushing Kits TOTAL CHAOS offers a replacement urethane bushing kit for all Tacoma & Tundra suspension systems. Long travel bushing kits include half bushings for two upper & two lower control arms. U.C.A. bushing kits include eight half bushings for both upper control arms. PT# - 69000 - Tacoma/Tundra Upper Control Arm Urethane Bushing Kit Price: $52.00 PT# - 69600 - Tacoma Long Travel Urethane Bushing Kit Price: $117.00 PT# - 69700 - Tundra Long Travel Urethane Bushing Kit Price: $110.00 |
|
|
|
 69600-NYL  69700-NYL |
96-04 Tacoma & 00-06 Tundra Nylatron® Bushing Kits For serious off-road use, TOTAL CHAOS offers Nylatron® bushings to compliment your TC suspension system. Nylatron® is a high performance nylon based plastic that has great wear resistance and lubrication properties. Suspension geometry is maintained during heavy cornering and uneven landings giving you more control. Nylatron® will not wear as fast as urethane. Long travel kits include eight upper control arm & eight lower control arm half bushings. U.C.A. kits include eight half bushings. This kit is intended for TOTAL CHAOS suspension kits. Not recommended for daily driven vehicles. PT# - 69000-NYL - Tacoma/Tundra Upper Control Arm Nylatron® Bushing Kit Price: $150.00 PT# - 69600-NYL - Tacoma Long Travel Nylatron® Bushing Kit Price: $250.00 PT# - 69700-NYL - Tundra Long Travel Nylatron® Bushing Kit Price: $257.00 |
|
|
|
 |
Universal Pin to Eyelet Shock Conversion Tundra/4 Runner/Ford F150 97-03/ TC offers an upper shock clevis that converts the factory rear pin style upper shock mount to incorporate a wider range of aftermarket shock options that are available in 1.25” width. This 5/8” bolt on adapter allows the installation of 2.0” or 2.5” diameter shocks. Some drilling may be necessary to install. This adapter was designed to aid pin to eyelet conversion shock modifications. Fox shocks will require special request narrower hi-misalignment spacers to fit the 1.25” tab, specify this dimension when ordering shocks. PT# - 30012 Price: $40.00 / pr. |
|
*Photo shown for representation only |
|
 |
© 2008 Total Chaos Fabrication | Product Disclaimer |
 |