Total Chaos Fabrcation

5TH GEN 4RUNNER STANDARD SERIES LOWER CONTROL ARMS

2010-2024 TOYOTA 4RUNNER LOWER CONTROL ARMS
PERFORMANCE LOWER A-ARM
PART #86500-10FJ
$1,943.55

2010-2024 TOYOTA 4RUNNER LOWER CONTROL ARMS5th-gen-toyota-4runner-lower-control-arms-standard-series-25th-gen-toyota-4runner-lower-control-arms-standard-series-35th-gen-toyota-4runner-lower-control-arms-standard-series-4
CALL TO PLACE ORDER
INSTALL INSTRUCTIONS



WHY

Stock ball joints and rubber bushings eventually wear out and must be replaced. Sloppy steering and uneven tire wear are common when these parts become worn out or damaged. You cannot individually order bushings or ball joints from Toyota for the factory lower control arms.

LCA's are 100% bolt-on and upgrade ball joints to a 1" stainless steel uniball to maximize strength. Rubber bushings are replaced with urethane bushings to provide better off road trail handling and steering response. Less bushing deflection allows the vehicle steering to be more responsive at higher speed on and off road.

These fully rebuildable lower control arms are hand crafted from 4130 chromoly construction making them much stronger than the stock units. Available with single shock tabs or dual shock capability to maximize vehicle dampening control and performance.

FEATURES

Control arms are 100% bolt on.

Features a two-bolt billet machined uniball adapter that bolts to factory spindle.

Lower ball joints are upgraded to a 1'' stainless steel uniball for maximum wheel travel and added component strength.

3/16'' main body stock length fully boxed lower control arms are CNC laser cut and include internal gussets.

Boxed arms feature replaceable urethane pivot bushings. Pivots include zerk fittings to maintain the equipment while bolted on the vehicle.

1/4'' thick steel skid plate is integrated into the control arm for rock crawling protection.

Weld-on bump stop spacers are included.

These arms will not fit on Hilux Revo or vehicles equipped with KDSS.

Not compatible with shocks outfitted with bushing lower rod ends.

Stock length replacement lower A-arm - SINGLE SHOCK ONLY.

Three stage powder coat includes a durable clear coat.

Hand crafted in the U.S.A.

NOT COMPATIBLE WITH 4"-7" SPINDLE/DROP BRACKET LIFTS.

PARTS INCLUDED





Home > Lower Control Arms > Toyota > 2010-CURRENT 4Runner

5TH GEN 4RUNNER STANDARD SERIES LOWER CONTROL ARMS
2010-2024 TOYOTA 4RUNNER LOWER CONTROL ARMS
PERFORMANCE LOWER A-ARM
PART #86500-10FJ
$1,943.55

CALL TO ORDER
INSTALL INSTRUCTIONS


WHY

Stock ball joints and rubber bushings eventually wear out and must be replaced. Sloppy steering and uneven tire wear are common when these parts become worn out or damaged. You cannot individually order bushings or ball joints from Toyota for the factory lower control arms.

LCA's are 100% bolt-on and upgrade ball joints to a 1" stainless steel uniball to maximize strength. Rubber bushings are replaced with urethane bushings to provide better off road trail handling and steering response. Less bushing deflection allows the vehicle steering to be more responsive at higher speed on and off road.

These fully rebuildable lower control arms are hand crafted from 4130 chromoly construction making them much stronger than the stock units. Available with single shock tabs or dual shock capability to maximize vehicle dampening control and performance.

FEATURES

Control arms are 100% bolt on.

Features a two-bolt billet machined uniball adapter that bolts to factory spindle.

Lower ball joints are upgraded to a 1'' stainless steel uniball for maximum wheel travel and added component strength.

3/16'' main body stock length fully boxed lower control arms are CNC laser cut and include internal gussets.

Boxed arms feature replaceable urethane pivot bushings. Pivots include zerk fittings to maintain the equipment while bolted on the vehicle.

1/4'' thick steel skid plate is integrated into the control arm for rock crawling protection.

Weld-on bump stop spacers are included.

These arms will not fit on Hilux Revo or vehicles equipped with KDSS.

Not compatible with shocks outfitted with bushing lower rod ends.

Stock length replacement lower A-arm - SINGLE SHOCK ONLY.

Three stage powder coat includes a durable clear coat.

Hand crafted in the U.S.A.

NOT COMPATIBLE WITH 4"-7" SPINDLE/DROP BRACKET LIFTS.

PARTS INCLUDED
5th-gen-toyota-4runner-lower-control-arms-standard-series-45th-gen-toyota-4runner-lower-control-arms-standard-series-25th-gen-toyota-4runner-lower-control-arms-standard-series-35th-gen-toyota-4runner-lower-control-arms-standard-series-4



INSTALLATION INSTRUCTIONS

CUSTOMER SUPPORT

Authorized Dealer Locator
Sales Guides
Product Disclaimer
Warranty & Return Policy

Warning WARNING: This product can expose you to a chemical or chemicals such as Talc, which is known to the State of California to cause cancer, birth defects and/or reproductive harm. For more information go to www.P65Warnings.ca.gov

HEADQUARTERS

TOTAL CHAOS FABRICATION INC.
159 NORTH MAPLE STREET
UNIT #J
CORONA, CA 92878
951.737.9682

Hours: M-Th 7am to 5:30pm PST
Closed: Fri, Sat & Sun

info@chaosfab.com

Follow the CHAOS

Back to Top
CUSTOMER SUPPORT
AUTHORIZED DEALER LOCATOR
Sales Guides
Installation Instructions
PRODUCT DISCLAIMER
WARRANTY & RETURN POLICY
Warning P65 WARNING: These product can expose you to a chemical or chemicals such as Talc, which is known to the State of California to cause cancer, birth defects and/or reproductive harm.
For more information go to www.P65Warnings.ca.gov



FOLLOW THE CHAOS: 		Headquarters
TOTAL CHAOS FABRICATION INC.
159 NORTH MAPLE STREET
UNIT #J
CORONA, CA 92878
951.737.9682

Hours: M-Th 7am to 5:30pm PST
Closed: Fri, Sat & Sun

info@chaosfab.com