05+ Tacoma 6 Lug, 07+ FJ Cruiser & 03+ 4Runner
Bolt On 2.0" Rear Bump Stop Kit (FOX)
 
  • 100% bolt on bump stop bracket mount to the factory bolt holes and replaces the factory bump stop.
  • Utilizes 2.5" travel FOX 2.0" diameter bump stops.
  • Increases handling and performance on and off road when weight has been added to the bed of the truck.
  • Cushions harsh bottom outs.
  • Includes lower strike pad that bolts to the factory u bolt location.
  • Grade 8 hardware is included.
Part # 48623F: 05+ Tacoma
Price $400.00
 
Bolt On 2.0" Rear Bump Stop Kit (KING)
 
  • 100% bolt on bump stop bracket mount to the factory bolt holes and replaces the factory bump stop.
  • Utilizes 2" travel KING 2.0" diameter bump stops.
  • Increases handling and performance on and off road when weight has been added to the bed of the truck.
  • Cushions harsh bottom outs.
  • Includes lower strike pad that bolts to the factory u bolt location.
  • Grade 8 hardware is included.
Part # 48623K: 05+ Tacoma
Price $450.00
 
Lower Link Skids
 
  • 100% bolt on.
  • Grade 8 - 9/16" monting hardware is included.
  • Laser cut pre bent 3/16" mild steel brackets.
  • Compatible only with TC or stock links.
  • Can be welded on for maximum protection.
Part # 48650: 07+ FJ Cruiser & 03-09 4runner
Price $99.99
 
Weld-on Upper Coil Bucket Tower Gussets
 
  • Reduces upper coil bucket flex and double shears factory upper control arm bolt.
  • Compatible only with TC UCA's or L/T kits, not intended for use with factory control arms.
  • Welding and grinding are required to install.
  • Not compatible with vehicles equipped with K.D.S.S.
Part # 59651: 07+ FJ Cruiser, 03-09 4runner
Part # 59653: 05+ Tacoma
Price $89.99
 
Weld-on Spindle Gussets
 
  • Must have reinforcement for anyone who wants to run hard in the dirt!
  • Strengthens spindle uprights and prevents the knuckle from damage during hard impacts.
  • 1/8" prebent laser cut mild steel brackets.
  • Eliminates the factory sway bar.
  • Welding and grinding are required to install.
Part # 59698
Price $42.99
 
Weld-on Spindle Gussets with swaybar mounts
 
  • Must have reinforcement for anyone who wants to play in the dirt!
  • Strengthens spindle uprights and prevents the knuckle from damage during hard impacts.
  • 1/8" prebent laser cut mild steel brackets.
  • Retains the factory sway bar and includes an additional steering arm gusset.
  • Welding and grinding are required to install.
  • Trucks running factory back spacing wheels must run wheel spacers.
Part # 59698-SB
Price $60.00
 
Lower Control Arm Cam Tab Gussets
 
  • Reinforces weak factory cam alignment tab plates that bend during bottom outs or hard front impacts.
  • CNC laser cut 1/8" 4130 chromoly replacement cam plates weld-to the frame.
  • 1/4" thick lower cam alignment tabs will not bend like factory tabs.
  • Welding and grinding are required for installation.
Part # 59860: 05+ Tacoma, 07-09 FJ Cruiser & 03-09 4runner
Part # 59860-10FJ: 2010+ 4Runner & FJ Cruiser
Price $85.00
Upper Control Arm Urethane Bushing Kit
 
  • Complete TC upper control arm urethane replacement bushing kit.
  • Performance parts will require periodic maintenance based on your driving habits & local conditions.
  • TC stocks all replacement parts necessary to maintain your performance equipment: Uniball, brake lines, hardware, hi-misalignment spacers, replacement control arms.
  • Contact our facility direct to order these items.
Part # 69000
Price $52.00
Long Travel Nylatron Bushing Kit
 
  • Complete TC long travel suspension system replacement nylatron bushing kit.
  • Performance parts will require periodic maintenance based on your driving habits & local conditions.
  • Recommended ONLY for race applications.
  • Nylatron bushings do not deflect road vibration like urethane bushings will. These bushings require regular prep and maintenance.
  • Inspect bushings and other equipment regularly.
  • TC stocks all replacement parts necessary to maintain your performance equipment: Uniball, brake lines, hardware, hi-misalignment spacers, replacement control arms.
  • Contact our facility direct to order these items.
Part # 69700-NYL
Price $257.00
Long Travel Urethane Bushing Kit
 
  • Complete TC long travel suspension system replacement urethane bushing kit.
  • Performance parts will require periodic maintenance based on your driving habits & local conditions.
  • Inspect bushings and other equipment regularly.
  • TC stocks all replacement parts necessary to maintain your performance equipment: Uniball, brake lines, hardware, hi-misalignment spacers, replacement control arms.
  • Contact our facility direct to order these items.
Part # 69700: 07-09 FJ Cruiser, 03-09 4runner & 05+ Tacoma
Part # 69700-10FJ: 2010+ 4Runner & FJ Cruiser
Price $110.00
Long Travel Lower Arm Skid Plates +3.5"
 
  • Bolt-on aluminum lower skid plates are designed to fit TC 3.5" long travel system lower control arms.
  • Slide over rocks with an angled approach front lip.
  • Grade 8 mounting hardware is included.
Part # 86005
Price $112.00
Stock Length Bolt-on Lower Control Arm Skid Plates
 
  • Reduce hang ups on the trail with factory lower control arms.
  • Bolt-on steel skid plates can be welded to factory lower arm for maximum strength.
  • Mounting hardware is included.
Part # 86006: 05+ Tacoma, 07-09 FJ Cruiser & 03-09 4runner
Price $125.00
Long Travel Lower Arm Skid Plates +2"
 
  • Bolt-on aluminum lower skid plates are designed to fit TC 2" long travel system lower control arms.
  • Slide over rocks with an angled approach front lip.
  • Grade 8 mounting hardware is included.
Part # 86007
Price $112.00
 
Long Travel 4WD 4340 Axles +3.5" Extended
 
  • Designed for use with TC +3.5" long travel systems.
  • 4340 heat treated 3.5" extended axle shafts and clamps are included.
  • Re-uses factory Toyota inner and outer CV joints and boots.
Part # 86300: 07+ FJ Cruiser, 03+ 4runner
Part # 86301: 05+ Tacoma
Price $575.00
Long Travel 4WD 4340 Axles +2" Extended
 
  • Designed for use with TC +2" long travel systems.
  • 4340 heat treated 2" extended axle shafts and clamps are included.
  • Re-uses factory Toyota inner and outer CV joints and boots.
Part # 86305: 07+ FJ Cruiser, 03+ 4runner
Part # 86305T: 05+ Tacoma
Price $575.00
3.5" Lift Spindles
 
  • Increases cross member ground clearance and adds 3.5" of lift.
  • Designed to strengthen and reinforce known weak areas.
  • Fully custom fabricated lift spindle uses CNC machined bearing housings and caliper tabs with custom CNC laser cut parts.
  • Rugged boxed design for race or play applications.
  • Includes semi gloss black powder coat.
  • Extended D.O.T. stainless braided brake lines are included.
  • *These will only fit Prerunner & 6-Lug 2WD vehicles
Part # 86350: For Factory Balljoint Lower Control Arms Only
Part # 86350-LT: For TC Uniball Lower Control Arms Only
Price $1399.00
 
07+ FJ & 03+ 4Runner Chromoly Adjustable Rear Links
 
  • 100% bolt on.
  • Constructed from 1 1/4" .375 wall 4130 chromoly tubing for maximum strength.
  • Offers 1.5" more droop travel over stock when longer shocks are installed.
  • Includes urethane pivot bushings.
  • Upper, lower and pan hard bars are designed to incorporate a heim joint making the entire rear link system length adjustable.
  • Hi-misalignment spacers and hardware are included.
Part # 86400
Price $1289.00
 
Stock Uniball Lower Control Arms with Dual Shock Capability
 
  • 3/16" main body stock length fully boxed lower control arms are CNC laser cut and include internal gussets.
  • Boxed arms feature replaceable urethane pivot bushings. Pivots include zerk fitting to maintain the equipment while bolted on the vehicle.
  • 1/4" thick steel skid plate is integrated into the control arm for rock crawling protection.
  • Features a billet machined uniball adapter. Lower ball joints are upgraded to a 1" stainless steel uniball for maximum wheel travel and added component strength.
  • Dual shock capable or Jounce Shock compatible.
  • Weld-on bump stop spacers are included.
  • *These arms will not fit the 05+ Hilux Vigo
Part # 86500: 05+ Tacoma Prerunner & 4WD, 07-09 FJ Cruiser, 03-09 4runner
Part # 86500-10FJ: 2010+ 4Runner & FJ Cruiser
Price $1599.99
 
RACE SERIES STOCK LENGTH CHROMOLY BOXED LOWERS
 
  • Racer inspired and constructed from 100% laser cut 4130 chromoly.
  • The lightest weight bolt on lower arm @ 16.5 pounds.
  • Maximizes vehicle ground clearance with integrated lower uniball cup.
  • Dual 2.5 shock capability provides maximum dampening control.
  • 1" 100% stainless steel uniball replaces factory lower ball joints.
  • Replaceable polyurethane pivot bushings include zerk fittings for easy maintenance.
  • *These arms will not fit the 05+ Hilux Vigo
  • *1.25" wheel spacers are required.
Part # 86500R: 05+ Tacoma Prerunner & 4WD, 07-09 FJ Cruiser, 03-09 4runner
Part # 86500R-10FJ: 2010+ 4Runner & FJ Cruiser
Price $1799.00
 
Dual Shock Hoops - Long Travel Control Arms
 
  • Maximize vehicle dampening control when you install a dual 2.5" shock mount system.
  • 4130 prebent chromoly shock hoops are designed to install secondary 2.5" smooth body or bypass shocks for maximum IFS dampening control.
  • Reinforces the factory coil bucket and helps reduce flex.
  • Upper shock tabs are tacked in place to aid in secondary shock location set up.
  • Includes grade 8 hardware.
Part # 86600
Price $250.00
 
Dual Shock Hoops - Stock Length Control Arms
 
  • Maximize vehicle dampening control when you install a dual 2.5" shock mount system.
  • 4130 prebent chromoly shock hoops are designed to install secondary 2.5" piggy back or bypass shocks for maximum IFS dampening control.
  • Reinforces the factory coil bucket and helps reduce flex.
  • Upper shock tabs are tacked in place to aid in secondary shock location set up.
  • Includes grade 8 hardware.
  • Installation of this system requies TC 86500 boxed lower control arms.
  • Lower shock mounting clevis is included.
  • Does NOT work with stock lower control arms.
Part # 86602
Price $375.00
 
Uniball Removal & Re-installation Tool
 
  • Aids in the removal and reinstallation of a 1" uniball from any uniball cup during vehicle prep.
  • Designed to be used with any hydraulic press, shop press or a hammer.
  • Prevents damage to new uniball during reassembly.
Part # 96006
Price $39.99
 
COMPANY PROFILE    
     PRODUCT DISCLAIMER