2007-2009 FJ Cruiser 2WD & 4WD
2003-2009 4Runner 2WD & 4WD
2003-2009 Prado 120 Series
  • 100% chromoly constructed Race System offers maximum ground clearance and weighs 10 pounds less than the standard TC +3.5" LT kit.
  • 3.5" extended 4130 chromoly tubular upper arms bolt to factory control arm mounting locations.
  • Upper and lower ball joints are replaced with 1" uniballs for maximum wheel travel and component strength. TOTAL CHAOS includes 1" I.D. uniballs that feature a heat treated stainless steel ball & heat treated stainless steel race for maximum corrosion resistance and component longevity. These uniball's also features a military grade PTFE woven fabric liner that helps prevent noise.
  • 4130 chromoly boxed and internally gusseted 3.5" extended lower control arms bolt to factory control arm mounting locations and are pre tabbed for dual shock capability.
  • Lower control arms feature an integrated uniball cup that provides 2.5" additional ground clearance when compared to the standard mild steel +3.5" LT kit.
  • Lower arms are 5 pounds lighter each side than the standard +3.5" LT kit.
  • 2.5" long travel specific coil over shocks bolt into the factory coil bucket location. Extended travel shocks are too short and will not work.
  • A secondary external bypass shock can be installed to increase dampening and tune-ability.
  • Spring rate options offer the ability to customize your ride for your specific application allowing you to custom tune the vehicle for specific terrain or desired performance.
  • Adjustable limit strap clevis' are included so that you can properly limit the suspensions droop wheel travel and make necessary adjustments during the life of the limit strap.
  • DOT approved stainless steel braided brake lines, TC custom 17-4 stainless hi-misalignment spacers and grade 8 mounting hardware is included.
  • TC 4340 custom extended axles reuse factory inner and outer CV's to retain 4wd.
    (axles are sold separately and not included with the kit)
  • 2 stage powder coat process includes a durable clear coat to provide a long lasting finish.
  • Hand crafted in the U.S.A.
  • Fiberglass fenders are required on Tacoma.
  • *If FOX Shox will be used, an "F" must be added to the LT kit part number, i.e. 86004-R-F

  • OPTIONAL HEIM PIVOT UPGRADE
  • TC includes 3/4" chromoly lined heim joints for the pivots.
  • 4130 chromoly tubing heim upper control arms are fully adjustable to allow maximum tuning of caster and camber.
  • Zero bushing deflection.

LIFT: 3-4" TRAVEL: 13" TIRE: 33" or 285 TRACK WIDTH INCREASE: 7"


Warning: readdir() expects parameter 1 to be resource, boolean given in /home/content/12/8675212/html/kitpage01.php on line 505
COMPANY PROFILE    
     PRODUCT DISCLAIMER